Building Scalable = Cisco Internetworks (BSCI) v1

Building Scalable Cisco Internetworks (BSCI)=20 v1.2

Associated
Certifications:

CCIP=20

Duration:

5 = days,=20 Instructor-led

3DPrerequisites

To fully benefit from BSCI, you should already possess certain=20 prerequisite skills. These skills can be acquired from self-paced = or=20 instructor-led training sessions and from work experience. You = should have=20 a working knowledge of:

=B7 Commonly used networking = terms,=20 numbering schemes, and topologies

=B7 The Open System = Interconnection=20 (OSI) reference model

=B7 Operation and = configuration of a=20 Cisco router

=B7 TCP/IP stack and = configuration of=20 IP addresses

=B7 Distance vector routing = protocol=20 (Routing Information Protocol [RIP], Interior Gateway Routing = Protocol=20 [IGRP]) operation and configuration

=B7 Static and default route = usage,=20 implementation, and configuration

=B7 The contents and = interpretation of=20 a Cisco routing table

=B7 Traffic filtering with = standard=20 and extended access lists

=B7 Verifying router = configuration=20 using show and debug command output

=B7 WAN serial interface = configuration=20 using HDLC

=B7 WAN serial interface = configuration=20 using Frame Relay permanent virtual circuits (PVCs) =

=B7 Note: These topics are = covered in=20 the Interconnecting Cisco Network Devices (ICND) course. =

3D"Course

Building Scalable Cisco Internetworks (BSCI) focuses on using = Cisco=20 routers connected in LANs and WANs typically found at medium to = large=20 network sites.The course provides the learner with in-depth = information on=20 these interior gateway protocols (IGPs): Enhanced Interior Gateway = Routing=20 Protocol (EIGRP), Open Shortest Path First (OSPF), and = Intermediate=20 System-to-Intermediate System (IS-IS). It also provides = information on=20 Border Gateway Protocol (BGP), an exterior gateway protocol (EGP). = The=20 course covers routing principles of both distance vector and = link-state=20 routing protocols; IP addressing techniques; the theory behind the = EIGRP,=20 OSPF, IS-IS, and BGP routing protocols; and configuration and=20 troubleshooting information for each protocol.Hands-on lab = exercises allow=20 the learner to practice configuration and troubleshooting = knowledge and to=20 acquire the skills necessary to configure these protocols in = customer=20 networks.Upon completing this course, the learner will be able to = select=20 and implement the appropriate Cisco IOS? services required to = build a=20 scalable, routed network.BSCI is part of the recommended learning = path for=20 students seeking the Cisco Certified Internetworking Professional = (CCIP),=20 Cisco Certified Network Professional (CCNP), Cisco Certified = Design=20 Professional (CCDP), and Cisco Certified Internetwork Expert = (CCIE)=20 certifications.

NOTE: BSCI v1.2 represents a minor revision to the existing = Building=20 Scalable Cisco Networks (BSCN) v1.1 course. BSCI v1.2 adds a = module to=20 address the IS-IS protocol, but the learning objectives are = otherwise=20 equivalent.

3D"Course

Routing Principles

Extending IP Addresses

Configuring EIGRPConfiguring OSPF in a Single Area =

Interconnecting Multiple OSPF Areas

Configuring IS-IS Protocol

Optimizing Routing Update Operation

Configuring Basic Border Gateway Protocol

Implementing BGP in Scalable Networks=20

3D"Who

=B7 Network administrators = and=20 technicians who are responsible for implementing and = troubleshooting=20 complex routed network environments.

=B7 CCIP, CCNP and CCDP = candidates=20

=B7 CCIE Routing and = Switching=20 candidates

=B7 CCIE Communications = & Services=20 candidates